Which type of steel grating is more suitable for parking lots?

Parking lots can use platform steel grating, a widely used steel grating product in recent years. This type of steel grating has a wide range of applications in various industrial fields, exhibiting superior resistance to surface impacts, especially the 50mm crossbar spacing, which provides strong resistance to lateral impacts.

Platform steel grating has a very wide range of applications, suitable for various platforms in factories, workshops, mines, and ports. It is aesthetically pleasing, easy to install, and a new generation of building products. Kick plates (edge plates), checkered plates, and connecting parts can be welded around the perimeter. Different specifications of flat steel can be used for edging, or angle steel, channel steel, square tubing, etc. Handles and hinges can also be installed on steel gratings that need to be frequently moved or opened.

Welding requirements for platform steel grating: Before welding, the supporting steel beams and the surface of the galvanized steel grating must be thoroughly cleaned of paint, rust, oil, and water. If segmented welding is used for steel grating, the weld length should be no less than 25mm, and the weld leg height no less than 5mm. Welding should be done on the side of the load-bearing flat steel of the steel grating. After welding, remove the weld beads and spatter. Features of parking lot steel grating: Saves floor space; can be built in upper or lower levels according to actual needs. No rainwater retention; excellent drainage.

Platform steel grating, also known as grid plate, is a steel product made by arranging flat steel bars at certain intervals and crossbars, and welding them into square grids in the center.